Teledyne SierraNet M408, User Manual, Page: 184 / 248

Teledyne LeCroy InFusion Scenarios
176 SierraNet M408 Protocol Analyzer User Manual
TABLE 4.2: Events and their Descriptions (FC)
Event Description
User Patterns
Most Recent Lists the most recent Events.
New User Group Lists the new user groups.
Presets
Timers/External
Timer The Event occurs when the timer expires.
Other Trigs Analyzer: the Event occurs when the Analyzer triggers.
External: the Event occurs when the external Trigger In is
asserted.
Basic
Ordered Set Refer to section “Ordered Set” on page 95 .
Basic Link Service Refer to section “Basic Link Service” on page 99 .
Link Control Frame Refer to section “Link Control Frame” on page 100 .
Link Speed The Event occurs when the link is at the specified speed.
Both Linkup The Event occurs when both ports are out of electric idle.
Training Sequence Inject Error on Control : Generates Manchester Coding
violation on Control field bits corresponding to the defined
mask: One means violation, and zero means no error.
Inject Error on Status : Generates Manchester Coding
violation on Status field bits corresponding to the defined
mask: One means violation, and zero means no error.
Frame Marker Error : Generates training sequence with an
invalid frame marker.
Recode Manchester Coding : Forces jammer to recalculate
Manchester Coding for each bit of training frame. Refer to
section “Training Sequence” on page 98 .
FCP
FCP SCSI Command Refer to section “SCSI” on page 79 .
FCP Frame Information
Unit
Refer to section “Frame Information Unit” on page 79 .
SCSI Command Status Refer to section “SCSI” on page 79 .
FCP Task Management Refer to section “FCP Task Management” on page 80 .
ELS
Extended Link Service ‐
Request
Refer to section “ELS Patterns” on page 80 .
Extended Link Service ‐
Request, Reply
Refer to section “ELS Patterns” on page 80.
Extended Link Service ‐
Reply
Refer to section “ELS Patterns” on page 80.
GS