Teledyne SierraNet M408, User Manual, Page: 67 / 248

SierraNet M408 User Manual 59
Analyzer Settings Teledyne LeCroy
Figure 2.34: Port Status Pane.
2.6.4 Session Control Pane
Use the Session Control pane (see Figure 2.35 on page 59 ) to run and stop a capture. You
can also set the idle.
Figure 2.35: Session Control Pane.
Disabling a port can be used to save recording buffer space. A disabled port can still
trigger the analyzer.
Auto Speed is the default port speed selection. It will automatically detect and display the
line speed. In rare cases (such as debugging speed negotiation), it might be desired to set
the analyzers speed manually. Note, that when the speed is set manually, traffic at
different speeds will not be captured correctly.
When “Trace is Not Saved” is displayed, this means that the trace is opened for viewing in
Quick View mode, but it has not been saved to disk yet.
2.6.5
R
ecording Settings Pane
Use the Recording Settings (see Figure 2.36 on page 59 ) pane to select and set the
number and size of segments and save a new trace file. (See “Buffer Size and Segments”
on page 103 .)
Figure 2.36: Recording Settings Pane.
Start/Stop Session Button before recording is started
Start/Stop Session Button after recording is started
Slider
Click to display the Recording
Settings dialog