Teledyne SierraNet M408, User Manual, Page: 124 / 248

Teledyne LeCroy Quick View
116 SierraNet M408 User Manual
3.2 Quick View
By default, the Software Settings enable Quick View . Quick View allows full access to the
whole trace more quickly, especially when using a Gigabit Ethernet connection. However,
the trace is NOT written to the host machine hard drive. To save the trace, you must
manually select Save or Save As.

If you select Save , the application saves the entire trace to a default file name.
The trace remains open and its name is updated to reflect the saved location.

If you select Save As , the application saves the trace to the specified location,
and opens that trace from the new location. The original Quick View mode trace
remains open as well.
If you de ‐ select Quick View in the Software Settings to disable Quick View, then the trace
loads more slowly, but is automatically saved to the host machine hard drive. When
Quick View is enabled, the Viewer displays successive parts of trace data as they upload.
As soon as a trace part uploads, it is available in all trace views.
Figure 3.6: Enable Quick View
If you only need quick successive traces, and do not need to save them, keep the default
setting to enable Quick View.
If you need to save all captured traces, de ‐ selecting the Quick View setting loads the
traces faster, especially for larger traces and slower connections.
To refresh the viewer display with more uploaded data, scroll to the end of the trace,
using scroll bars, page down, arrow down, or CTRL ‐ End. Newly uploaded data then
appears there.