Teledyne SierraNet M408, User Manual, Page: 211 / 248

SierraNet M408 Protocol Analyzer User Manual 203
InFusion Scenarios TeledyneLeCroy
4.6.17 Copy/Cut and Paste States
You can copy and paste states from Global Rules to Sequences. You can also copy/cut and
paste states between Sequences. You cannot cut a state from nor paste a state into Global
Rules.
1. Right ‐ click in the blue title area of the State you want to copy and select Copy State
(or Cut State if applicable).
2. Right ‐ click in the white workspace of the desired target Sequence and select Paste
State.
4.6.18 Copy/Cut and Paste Conditions
You can copy and paste Conditions within and between States.
1. Right ‐ click in the empty yellow space of the Condition you want to copy and select
Copy Condition (or Cut Condition if applicable).
2. Right ‐ click in the gray placeholder area (i.e. in the area that says "Drag an event
here....") of the desired target State and select Paste.
4.6.19 Copy/Cut and Paste Events
You can copy and paste Events within and between States.
1. Right ‐ click on the Event you want to copy and select Copy (or Cut if applicable).
2. Right ‐ click in the empty yellow space of the desired target Condition or in the gray
placeholder area (i.e. in the area that says "Drag an event here....") of the desired
target State and select Paste.
4.6.20 Marker Trigger
Purpose
The main purpose of this feature is enabling the user to mark specific parts of the
captured traffic for better tracking.
Solution
The Marker Trigger action will be added to Jammer under Trigger Output category. Also,
for differentiating various markers, the action will has an Index parameter that will be
shown in the captured traffic as well. Therefore 8 Marker actions will be as bellow:
1. Jammer Marker 1
2. Jammer Marker 2
3. Jammer Marker 3
4. Jammer Marker 4
5. Jammer Marker 5
6. Jammer Marker 6
7. Jammer Marker 7