Teledyne SierraNet M408, User Manual, Page: 118 / 248

Teledyne LeCroy Advanced Mode (User ‐ Defined)
110 SierraNet M408 User Manual
Figure 2.86: Filter Settings Dialog

If you choose Capture Everything, you can select Idles for exclusion.

Select Filter In Selected Patterns or Filter Out Selected Patterns to select pat ‐
terns for inclusion or exclusion (see Figure 2.86 ). See “Triggering/Filtering Pat ‐
terns (Easy Mode)” on page 71 .

Choose pattern(s) and click the > button to add them for capture or exclusion.
You define each pattern the same way as in Easy mode ( “Triggering/Filtering Pat ‐
terns (Easy Mode)” on page 71 ).

Click Capture Nothing to run the trace without capturing anything.

Click on the checkboxes to Always Filter Out Idles, RRDY or ports 1 through 8.

Select ARBFF, NOS, VC_RDY, Before ports are up, or Training Pattern. ARBff, NOS
and VC_RDY are ordered sets that show up frequently and are of little use in
most cases, and selecting allows you to specifically filter them out. Before ports
are up will filter everything before the ports are up, to save buffer space and
allow to concentrate on the parts important to the user. Training Pattern will
similarly filter out all Training Patterns

Check the Truncate Payload option to truncate payload after x ‐ number of
Dword(s) 0 bytes. (see Figure 2.86 ).