Teledyne SierraNet M408, User Manual, Page: 188 / 248

Teledyne LeCroy InFusion Scenarios
180 SierraNet M408 Protocol Analyzer User Manual
Note:
You can specify additional Sequences and States. The application automatically checks for the
maximum number of terms (sequences/states). When you exceed the limit, an error is flagged,
prompting you to jump to the place that caused the error.
Note:
You can specify additional Sequences and States. The application automatically checks for the
maximum number of terms (sequences/states). When you exceed the limit, an error is flagged,
prompting you to jump to the place that caused the error.
Creating InFusion Scenarios is easy, but it requires an understanding of the following
terms defined in Table 4.3.
Link Layer Discovery
Protocol
Refer to section “Link Layer Discovery Protocol Pattern” on
page 83.
Internet Protocol Refer to section “Internet Protocol Pattern” on page 84.
iSCSI Refer
to section “iSCSI Pattern” on page 84 and “ISCSI
Cmd” on page 86.
VLAN Refer to section “VLAN Patterns” on page 87.
ISL Refer to section “ISL Patterns” on page 87.
CN ‐ Tag Refer to section “CN Tag Patterns” on page 88.
VN ‐ Tag Refer to section “VN Tag Patterns” on page 88.
Trill Frame Refer to section “Trill Frame” on page 90.
Protocol Errors Refer to section “Protocol Errors” on page 92.
Jammer Internal
Triggers
Refer to section “Synch Jammer Scenarios with Jammer
Internal Triggers” on page 206.
Event Description