Teledyne SierraNet M408, User Manual, Page: 112 / 248

Teledyne LeCroy Advanced Mode (User ‐ Defined)
104 SierraNet M408 User Manual
other port's traffic will only appear later. This occurs as a function of the trigger position,
and is normal, expected behavior of the analyzer.
To upload segments manually in the Segment Manager, select the Use upload manager
(no automatic upload) checkbox. To upload segments automatically for display as the
system creates them, do not select the checkbox.
2.8 Advanced Mode (User-Defined)
Advanced Mode expands Analysis capability by allowing you to program complex
triggering and data capture projects.
The Advanced Mode is a state machine. You can program each state individually to:

Trigger on a different Event or trigger unconditionally.

Capture Everything, Nothing, or a user ‐ defined pattern.

Include up to three ELSE IF statements, allowing a jump to any other state based
on a user definition.

Use up to three timers, which you can set to a maximum value of 4294900 ms or
over one hour. If you enter a value larger than 42494900ms a warning pop ‐ up
displays: Invalid value! Please enter a value between 0 and 4294900 .You can set
a timer in the state or continue the timer set in the previous state.

Output an external trigger High or Low.
Note:
In Advanced Mode, Events on each link are counted independently. A condition is met if the
number of Events on a link equals the defined occurrence.
2.8.1 Working in Advanced Mode
To start working in the Advanced Mode, click the Switch to Advanced mode button in the
Trigger Filter Settings as shown in Figure 2.82 .
You can:

Display the state definition

Set Output Trigger level

Select up to three timers

Define the If condition and up to three Else If conditions

Set number of occurrences before trigger

Set captured data

Set excluded data

Go to next state

Add state

Choose link for Sequencer setup