Teledyne SierraNet M408, User Manual, Page: 239 / 248

SierraNet M408 Protocol Analyzer User Manual 231
Batch Scenario Overview Teledyne LeCroy
Figure 5.17: Destination Address field selected.
A batch scenario such as this can run a jammer scenario with a frame event. An example
is shown in Figure 5.18.
Figure 5.18: Destination Address before changes.
As you see, the “Destination Address” field is 0xXXXXXXXX XXXX. After starting the batch
scenario, the expected behavior is the “Destination Address” field is replaced with the
value 0x1122334455 from the defined global variable.
If you check the same jammer frame event after running the batch, the result will be as
seen in Figure 5.19, which is the expected behavior.