HDO9000 High Definition Oscilloscopes Operator's Manual
Digital
x
(Group) Set Up
To set up a digital input:
1.
to the test device and the instrument.
2. From the menu bar, choose
Vertical > Digital <#> Setup
, or press the front panel
Dig button
and
select the desired
Digital
x
tab
.
3. On the Digital
x
set up dialog, check the boxes for lines
D0
through
D15
that comprise the
group.
Touch the Display D0-D7 and Display D8-D15 buttons to quickly turn on the entire digital bank,
or touch the Right and Left Arrow buttons to switch between each digital bank as you make
line selections.
Note:
Each group can consist of anywhere from 1 to 16 of the leads, from either digital
bank regardless of the Logic set on the bank. It does not matter if the some or all of the
lines have been included in other groups.
4. Check
View Group
to enable the display. Go on to
for the group.
5. When you're finished on the Digital
x
dialog, touch
Logic Setup
and choose the
Logic Family
that applies to each digital bank, or set custom
Threshhold
and
Hysteresis
values.
44
