HDO9000 High Definition Oscilloscopes Operator's Manual
Vertical
Vertical, also called Channel, settings usually relate to voltage level and control input channel traces
(C1-C
x
) along the Y axis.
Note:
While Digital settings can be accessed through the Vertical menu on -MS model
instruments, they are handled quite differently. See
.
The amount of voltage displayed by one vertical division of the grid, or Vertical Scale (V/div), is most
quickly adjusted by using the front panel
Vertical knob
. The C
x
descriptor box always shows the
current Vertical Scale setting.
Detailed configuration for each trace is done on the
. Once configured, channel traces can
be quickly turned on/off or modified using the
Channel Setup Dialog
Use the Channel Setup dialog to quickly make basic Vertical settings for all analog input channels. To
access the Channel Setup dialog, choose
Vertical > Channel Setup
from the menu bar.
To show/hide the channel trace, select/deselect the checkbox next the channel number.
To change the channel trace color, touch the color block next to the channel number, then choose the
new color from the pop-up menu.
To change any other Vertical settings, touch the input field and enter the new value.
Tip:
Apply pre-processing settings on the
(Cx).
To copy settings from one channel to another, drag-and-drop the source channel descriptor box onto
the target channel descriptor box.
38
