Tektronix Socket 7 TMS109A, Instruction Manual

Page: 68 / 113

Acquiring and Viewing Disassembled Data
2–22
TMS 109A Socket 7 Microprocessor Support
In the Hardware display format, you can determine the executed order of the
out-of-order fetches by looking at the address of the out-of-order cycles and the
subsequent cycles. Fetch cycles always have the sample numbers displayed.
In the Software display format, out-of-order fetches are displayed in the order
they were executed (see Figure 2–8). If the previously executed instruction had a
larger sample number than the out-of-order fetch, the sample number will not be
displayed. If the previous sample number is smaller than the out-of-order fetch,
the sample number will be displayed. To mark an instruction without a sample
number, switch to the Hardware display format (see Figure 2–9 on page 2–23).
Figure 2–8: Software display for the AMD Bus cycles