Tektronix Socket 7 TMS109A, Instruction Manual

Page: 113 / 113

Index
TMS 109A Socket 7 Microprocessor Support
Index–3
Probe Mode cycles, 1–3
Processor Selection Jumper, 1–5
R
reads/writes, 1–3
reference memory, 2–28
restrictions, 1–2
S
segments, size and prefix override bytes, 2–26
service information, 4–1
setups, disassembler, 2–1
signals, active low sign, ix, 1–14
Signals not connected, 1–21, 1–22
Signals on the Probe Adapter, 1–21
Socket 7 signal delays, 4–2
Software display format, 2–15
out-of-order fetches, 2–22
special characters
?? indicates mnemonic field placement, 2–11
(16) or (32) indicates bit code segment, 2–10
(3DNow!) indicates instruction set, 2–10
(FLUSH) instruction flushed, 2–10
(MMX) indicates instruction set, 2–10
# indicates an immediate value, 2–10
– indicates bus cycle from “Other” processor, 2–10
* (asterisk) to indicate out-of-order fetches, 2–21
**** indicates insufficient data avaliable, 2–10
<more>, 2–22
> indicates insufficient room on screen, 2–10
>> indicates manually marked fetch program, 2–10
c indicates cache invalidation, 2–24
SMM indicates system mode cycle, 2–10
t indicates number is in decimal, 2–10
special characters displayed, 2–10
specifications, 3–1
channel assignments, 1–14
electrical, 3–2
environmental, 3–3
mechanical (dimensions), 3–4
speculative prefetch cycles, 2–23
Subroutine display format, 2–16
support setup, 2–1
SUT power, 1–2
symbol table, Control channel group, 2–5
system file, demonstration, 2–28
System Management Mode, 2–25
T
terminology, ix
Timestamp display column, 2–14
Trace Processor field, 2–18
Tracking Jumpers, 1–6
V
viewing disassembled data, 2–9