Tektronix Socket 7 TMS109A, Instruction Manual

Page: 27 / 113

Getting Started
TMS 109A Socket 7 Microprocessor Support
1–11
NOTE . The ITP connection is implemented as a point-to-point connection. As
such, it cannot be used in a loopthrough mode for programming other Socket 7
modules.
Table 1–2 lists the pin-to-signal assignments of the In-Target Probe (ITP)
connector J580 on the probe adapter.
Table 1–2: ITP (J580) signal Information
Pin number Signal name
1 B_INIT
2 DBRESET
3 B_RESET
4 GND
5 –
6 +3.3 V
7 R_S#
8 GND
9 –
10 GND
11 PRDY
12 TDI
13 TDO
14 TMS
15 GND
16 TCK
17 GND
18 TRST#
19 –
20 –
These channels are not defined in any channel group and data acquired from
them is not displayed. To display data, you will need to define a channel group.