Tektronix Socket 7 TMS109A, Instruction Manual

Page: 63 / 113

Acquiring and Viewing Disassembled Data
TMS 109A Socket 7 Microprocessor Support
2–17
PADDW PAND PANDN PCMPEQB
PCMPEQD PCMPEQW PCMPGTB PCMPGTD
PCMPGTW PMADDWD PMULHW PMULLW
POR PSLLD PSLLQ PSLLW
PSRAD PSRAW PSRLD PSRLQ
PSRLW PSUBB PSUBD PSUBSB
PSUBSW PSUBUSB PSUBUSW PSUBW
PUNPCKHBW PUNPCKHDQ PUNPCKHWD PUNPCKLBW
PUNPCKLDQ PUNPCKLWD PXOR
Changing How Data is Displayed
There are common fields and features that allow you to further modify displayed
data to suit your needs. You can make common and optional display selections in
the Disassembly property page (the Disassembly Format Definition overlay).
You can make selections unique to the Socket 7 support to do the following
tasks:
H
Change how data is displayed across all display formats
H
Change the interpretation of disassembled cycles
H
Display exception vectors
NOTE
. All information defined in these fields pertain to the microprocessor that is
being traced.
You can make optional selections for disassembled data. In addition to the
common selections (described in the information on basic operations), you can
change the displayed data in the following ways:
H
Specify the code segment size
H
Choose an interrupt table
H
Specify the starting address of the interrupt table
H
Specify the size of the interrupt table
H
Select to trace the Primary or Dual microprocessor
H
Choose whether to display or suppress the hardware cycles from the
microprocessor not being traced
Optional Display
Selections