Tektronix Socket 7 TMS109A, Instruction Manual

Page: 13 / 113

TMS 109A Socket 7 Microprocessor Support
ix
Preface
This instruction manual contains specific information about the TMS 109A Sock-
et 7 microprocessor support package and is part of a set of information on how to
operate this product on compatible Tektronix logic analyzers.
If you are familiar with operating microprocessor support packages on the logic
analyzer for which the TMS 109A Socket 7 support was purchased, you will only
need this instruction manual to set up and run the support.
If you are not familiar with operating microprocessor support packages, you will
need to supplement this instruction manual with information on basic operations
to set up and run the support.
NOTE
. The disassembly software is optimized to decode instruction streams and
bus activities from Intel microprocessors and AMD-K6-2 therefore, the disassem-
bler may not support unique characteristics of other manufacturers. However,
you can reliably conduct timing analysis of nonIntel Socket 7 processors. Consult
your Tektronix field office for future enhancements.
Manual Conventions
This manual uses the following conventions:
H
The term “disassembler” refers to the software that decodes bus cycles into
instruction mnemonics and cycle types.
H
A pound sign (#) following a signal name indicates an active low signal.
H
The phrase “information on basic operations” refers to your online help.