Tektronix RSA3408A, Technical Reference, Page: 79 / 86

Specifications
RSA3408A Technical Reference
2- 17
Table 2- 22: Certifications and compliances
Characteristic Description
EC Declaration of Conformity -- EMC Meets intent of Directive 89/336/EEC for Electromagnetic Compatibility. Compliance
was demonstrated to the following specifications as listed in the Official Journal of the
European Communities:
EN 61326
EMC requirements for Class A electrical equipment for
measurement, control and laboratory use.
1
IEC 61000-4-2 Electrostatic discharge immunity
(Performance criterion B)
IEC 61000-4-3 RF electromagnetic field immunity
(Performance criterion A)
IEC 61000-4-4 Electrical fast transient / burst immunity
(Performance criterion B)
IEC 61000-4-5 Power line surge immunity
(Performance criterion B)
IEC 61000-4-6 Conducted RF immunity
(Performance criterion A)
IEC 61000-4-11 Voltage dips and interruptions immunity
(Performance criterion B)
EN 61000-3-2 AC power line harmonic emissions
EN 61000-3-3 Power line voltage fluctuation/flicker
Australia/New Zealand Declaration of
Conformity -- EMC
Complies with EMC provision of Radiocommunications Act per the following
standard(s):
AS/NZS 2064.1/2
Industrial, Scientific, and Medical Equipment: 1992
EC Declaration of Conformity -- Low Voltage Compliance was demonstrated to the following specification as listed in the Official
Journal of the European Union:
Low Voltage Directive 73/23/EEC, amended by 93/68/EEC
EN 61010-1:2001
Safety requirements for electrical equipment for
measurement control and laboratory use.
U.S. Nationally Recognized Testing Laboratory
Listing
UL61010-1 Standard for electrical measuring and test equipment.
Canadian Certification CAN/CSA C22.2 No. 61010-1-04
CSA safety requirements for electrical and electronic
measuring and test equipment.
Additional Compliance ANSI/ISA 82.02.01:2004 Safety standard for electrical and electronic test,
measuring, controlling, and related equipment.
IEC61010-1 Safety requirements for electrical equipment for
measurement, control, and laboratory use.
1
Emissions which exceed the levels required by this standard may occur when this equipment is connected to a test
object.