Performance Tests
RSA3408A Technical Reference
1- 41
50
Ω
N-N coaxial cable
Output
Signal generator
RSA3408A
2.
Check spurious response:
a.
Modify the generator controls:
Set the generator output frequency to the value as shown in Table 1--5
(initially 25 MHz).
b.
Modify the analyzer controls:
H
Press the
FREQUENCY/CHANNEL
key on the front panel.
H
With the
Center Freq
side key, set the frequency to the same value
as the generator output using the numeric keypad.
c.
Measure the amplitude:
H
Press the
Select Marker
side key to select
1
.
H
Press the
PEAK
key and then the MARKERS:
B
(marker down)
key once to place the first marker at the peak on the noise floor.
H
Press the
Select Marker
side key to select
2
.
H
Press the
PEAK
key to place Marker 2 on the peak signal.
H
Read the delta marker readout (
Δ
1--2) on the screen. Check that the
components other than the carrier meet the requirement as shown in
Table 1--5 (initially --73 dBc).
Summary of Contents for RSA3408A
