Performance Tests
RSA3408A Technical Reference
1- 13
2.
Check frequency accuracy in the baseband:
a.
Modify the analyzer default settings:
H
Press the
FREQUENCY/CHANNEL
key on the front panel.
H
With the
Center Freq
side key, set the frequency to 10 MHz using
the numeric keypad.
H
Press the
SPAN
key on the front panel.
H
With the
Span
side key, set the span to 1 MHz using the general
purpose knob.
b.
Measure peak frequency:
H
Press the
PEAK
key to place the marker on the peak signal.
H
Read the marker readout. Confirm that the value is
10 MHz
1 kHz.
3.
Check frequency accuracy in the RF1 band:
a.
Modify the generator control:
Frequency
2 GHz
. . . . . . . . . . . . . . . .
b.
Modify the analyzer controls:
H
Press the
FREQUENCY/CHANNEL
key on the front panel.
H
With the
Center Freq
side key, set the frequency to 2 GHz using the
numeric keypad.
c.
Measure peak frequency:
H
Press the
PEAK
key to place the marker on the peak signal.
H
Read the marker readout. Confirm that the value is
2 GHz
1.4 kHz.
Summary of Contents for RSA3408A
