Performance Verification
1- 2
RSA3408A Technical Reference
Conventions
Throughout these procedures, the following conventions apply:
H
Each test procedure uses the following general format:
Title of Test
Equipment Required
Prerequisites
Procedure
H
Each procedure consists of as many steps, substeps, and subparts as required
to do the test. Steps, substeps, and subparts are sequenced as follows:
1.
First Step
a.
First Substep
H
First Subpart
H
Second Subpart
b.
Second Substep
2.
Second Step
H
Instructions for menu selection follow this format:
FRONT PANEL KEY
>
Side Menu Key
>
Submenu Key
.
For example, “Press MODE:
DEMOD
>
Digital Demod
>
Constellation
”.
“MODE:
DEMOD
” indicates the
DEMOD
key in the MODE menu area on
the front panel.
H
In steps and substeps, the lead-in statement in italics tells you what to do,
and the instructions that follow tell you how to do it.
The example step below is telling you to set the analyzer controls by
pressing the specified key sequence.
Set the RSA3408A analyzer controls:
Press MODE:
DEMOD
>
Digital Demod
>
Constellation
.
STOP
. The symbol at the left is accompanied by information you must read to do
the procedure properly.
Summary of Contents for RSA3408A
