2-55
Installation
After setting the Tally Control Module switches, install the module by following
the steps listed below:
1.
Remove the blank plate, if installed, and slide the Tally Control Module into
Slot D1 of the lower rear D Bay for switchers shipped before January, 1996
(Matrix 094800-00) or Slot C5 of the upper rear C Bay for switchers shipped
after January, 1996 (Matrix 094803-00). Pull the metal ejectors towards each
other to seat the module. Screw in the two screws at either end of the front
metal plate with a screwdriver
2.
Refer to the Cable Connections portion next in this section for tally connection
instructions.
The TALLY RESET button and the TALLY RUN light are located on the Sync
Generator Module in Slot A9. The Tally Run light can be viewed from the front of
the Model 4000 Signal Frame, and the Reset button can be accessed without
opening the Signal Frame door.
Timed Aux Output Option
The Timed Aux Output Option provides four timed aux output pairs (video/
video or video/key) from aux buses 5A through 8B. The outputs are autotimed on
the module to match the Program output. The option consists of the Timed Aux
Output Module (064852) with the Timed Aux Mezzanine (064854) mounted on it
and the Timed Aux Control Module (064855).
To install the Timed Aux Output option modules follow the steps below:
1.
Remove the blank plates or Serial Output Module, if installed, in location D3
and D2. Install the Aux Output Module into Slot D3. Pull the metal ejectors
towards each other to seat the module. Screw in the two screws at either end
of the front metal plate with a screwdriver.
2.
Install the Timed Aux Control Module into Slot B5 for systems shipped before
1/96 (Matrix 094800-00) or Slot B15 in systems shipped after
1/96 (Matrix 094803-00).
3.
Refer to the Cable Connections portion next in this section for Aux bus
connection instructions.
The parameters for various Aux Bus functions must be defined in the main menu
panel. Refer to the Model 4000 User’s Guide (TP0790) and Operation Reference
(TP0764) Manuals for detailed information.
Summary of Contents for Grass Valley 4000
