4-12
Section 4 — Maintenance
NOTE:
Pioneer power supply units are shown in
units, the lugs are diagonal.
c.
Locate and release the four captive slotted screws behind the top lip of the
right and left hand openings in the chassis (Two screws on each side).
WARNING
The chassis weighs approximately 125 lbs. It should be moved only by two
persons or with the aid of some type of mechanical lifting device. Failure to
follow this precaution could result in injury or damage to the equipment.
5.
Place a wheeled cart or some appropriate support in the front of the power
supply chassis to support it as it is removed.
6.
Release the chassis from the rack by removing the screws at the front of the
chassis at the left and right hand lip. See
Figure 4-4. Frame Power Supply Connector Removal
Summary of Contents for Grass Valley 4000
