manualshive.com logo in svg

Tektronix Grass Valley 4000, Installation And Service

The Tektronix Grass Valley 4000 is a versatile installation and service manual, providing comprehensive instructions for seamless product setup and maintenance. Easily accessible, users can download this indispensable resource for free from manualshive.com, ensuring hassle-free utilization of their Tektronix Grass Valley 4000 device.

Share
Download
background image

3-45

Control Panel Description

Top plate components include the following:

■

Upper Control Panel PuP (peripheral utility processor) circuit module: 
monitors and controls actions on the Upper Right Switch module, Soft Button 
Switch module, and Upper Left Switch module. It also controls the display of 
all lamps on the upper panel.

■

Lower Control Panel PuP circuit module: monitors and controls actions on the 
Lower Right Switch module, Lower Center Switch module, and Lower Left 
Switch module. It also controls the display of all indicator LEDs and lamps on 
the lower panel.

■

Lower Left Switch Assembly: contains the crosspoint and preview/Aux Bus 
pushbutton switches.

■

Lower Right Switch Assembly: contains the pushbutton switches, shaft 
encoders and knobs, indicators and lever arm for the Mattes sub-panel, 
Chroma Keyers sub-panel, Bus Delegate switches and Master Effects Memory 
sub-panel.

■

Lower Center Switch Assembly: contains pushbutton switches, shaft encoders 
and knobs, indicators and lever arms for the DSK sub-panel, Keyers sub-
panels, Transition sub-panels, Preview-only switches and Aux 1-4 Effects 
Send-only switches.

■

Upper Left Switch Assembly: contains pushbutton switches, shaft encoders 
and knobs for the External Interfaces sub-panel, Frame Store sub-panel and 
Menu buttons area.

■

Soft Button Switch Assembly: contains pushbutton switches for the nine menu 
selection buttons located under the flat panel display.

■

Upper Right Switch Assembly: contains pushbutton switches,   shaft encoders 
and knobs, and indicators for the Masks and Wipe sub-panels. Also present 
are four shaft encoders and knobs for the soft knobs located next to the flat 
panel display.

■

Positioner Assembly: contains the positioner joystick.

■

3.5" Floppy Disk Drive: contains a 3.5" floppy disk drive mounted in a metal 
support bracket. The drive is connected directly to the Control Panel CPU 
module.

■

Flat Panel Display: 512 by 256 pixel electroluminescent display connected 
directly to the Control Panel CPU module.

Summary of Contents for Grass Valley 4000































































































































































































































































































Reviews:

No comments

Related manuals for Grass Valley 4000

JDS Uniphase SCG Series User Manual preview
SCG Series
Brand: JDS Uniphase Pages: 37
Cabletron Systems SynOptics 3000 Series Manual preview
SynOptics 3000 Series
Brand: Cabletron Systems Pages: 101
SMART Hub VE220 Installation And User Manual preview
Hub VE220
Brand: SMART Pages: 46
Allied Telesis CentreCOM GS970M Series Quick Installation Manual preview
CentreCOM GS970M Series
Brand: Allied Telesis Pages: 21
Larson Electronics EXHL-TRN-LE1 Series Manual preview
EXHL-TRN-LE1 Series
Brand: Larson Electronics Pages: 2
Transition Networks SISTG1040-242-LRT Install Manuals preview
SISTG1040-242-LRT
Brand: Transition Networks Pages: 31
Lindy 32586 Quick Start Manual preview
32586
Brand: Lindy Pages: 2
Watchguard XTM 3 Series Hardware Manual preview
XTM 3 Series
Brand: Watchguard Pages: 26
Allen-Bradley Guard Master 440N-Z2NRS1A Installation Instructions preview
Guard Master 440N-Z2NRS1A
Brand: Allen-Bradley Pages: 4
EtherWAN EX17162A Installation Manual preview
EX17162A
Brand: EtherWAN Pages: 2
EtherWAN EX19164A Installation Manual preview
EX19164A
Brand: EtherWAN Pages: 2
ATEN CS428 User Manual preview
CS428
Brand: ATEN Pages: 26
Cabletron Systems 3E02-04 User Manual preview
3E02-04
Brand: Cabletron Systems Pages: 54
TESmart HSW1601A10 Quick Start Manual preview
HSW1601A10
Brand: TESmart Pages: 4
Conrad RSLT2 Operating Instructions Manual preview
RSLT2
Brand: Conrad Pages: 8
NB CT-HDVD-4X14K-SW User Manual preview
CT-HDVD-4X14K-SW
Brand: NB Pages: 23
Boca BOCAHUB-16 Plus BEN220 Installation Manual preview
BOCAHUB-16 Plus BEN220
Brand: Boca Pages: 56
CoolGear CG-UC31PD4H Product Manual preview
CG-UC31PD4H
Brand: CoolGear Pages: 8

Brands by name

Popular brands

Load more brands