2-51
Installation
The parameters for Secondary Wipes must be set in the main menu panel. These
menus appear under the main Wipe pushbutton. Refer to the Model 4000 User’s
Guide (TP0790) and Operation Reference (TP0764) Manuals for detailed
information.
Look Ahead Preview Option
The Look Ahead Preview Option consists of identical mezzanine modules (064829)
which mount on the Mix/Wipe Modules in each M/E: M/E 1 (Slot A8), M/E 2
(Slot A13), M/E 3 (4000-3 only) (Slot B9) and Program/Preset (Slot A16) next to the
Primary Wipe Mezzanines as shown in Figure 2-30. This option mezzanine
module not only provides Look-ahead preview, but also DSK Preview and the
Clean Feed video. An optional Serial Output Module must be present in Slot D5 to
view these outputs.
To install the modules, carefully remove the Mix/Wipe Modules from the frame.
Place them on a static free surface.
1.
Line up the six 50-pin connectors on the Look-ahead Preview mezzanine with
the matching connectors on the Mix/Wipe Module. Be sure the pins are lined
up properly before seating the mezzanine (look between the mezzanine and
the main module). Check that no pins are bent or outside of the connectors.
Push down firmly to seat the mezzanine to the module.
2.
From the solder side of the Mix/Wipe Module, attach the mezzanine to the
module, and install the screws into the metal spacers on the mezzanine.
3.
Carefully reinstall the Mix/Wipe Module in its proper location.
For operation refer to the Model 4000 User’s Guide (TP0790) and Operation
Reference (TP0764) Manuals for detailed information.
Figure 2-30. Secondary Wipe and Look Ahead Preview Option Installation
SECONDARY WIPE MEZZANINE
PRIMARY WIPE MEZZANINE
LOOK-AHEAD
PREVIEW
MEZZANINE
Summary of Contents for Grass Valley 4000
