2-60
Section 2 — Installation
Mask Draw Tablet Option
The following WACOM graphics tablet models are supported (Grass Valley does
not supply the tablet):
■
KT-0405-R “ART PAD” (PC compatible version)
■
UD—XXXX—R (Any PC-compatible UD-series tablet)
■
UD-608-R “ART Z” (PC compatible version)
■
SD series (these tablets are now obsolete; however, they may be used if a
pressure sensitive pen is used with the tablet)
Installing UD and KT Series Tablets
The following connector pin-out information applies to the UD and KT series
tablets.
The KT and UD tablets include a 9-pin male to 25-pin female adapter. You will
need a 25-pin male-to-male gender adapter to connect the tablet to the
POINTING
DEVICE
input port on the back of the switcher Control Panel.
The 9-pin male to 25-pin female adapter must be wired as follows: (All other pin
wiring is unchanged.)
1.
Connect the graphics tablet to the
POINTING DEVICE
input port on the back of
the switcher Control Panel.
2.
The Control Panel CPU Board RS-232 jumper blocks must be set to the “DCE”
position. Refer to the following text for Model-specific jumper locations.
Model 4000-2:
■
Open the Control Panel lid and locate the Control Panel CPU Board. Lo-
cate the two RS232 jumper blocks (2 pins each) labeled J3 at the top, mid-
dle, of the board. Set the blocks to the “DCE” setting (horizontal as you
view the board from the front of the panel).
Model 4000-3:
■
Open the Upper Control Panel lid and locate the Control Panel CPU
Board. Locate the two RS232 jumper blocks (2 pins each) labeled J11 in the
center of the board. Set the blocks to the “DCE” setting (horizontal as you
view the board from the front of the panel).
NOTE:
Refer to the Model 4000 User Guide for Drawing Tablet operational information.
25-Pin
9-Pin
Pin 2
Pin 3
Pin 3
Pin 2
Summary of Contents for Grass Valley 4000
