2-19
Installation
Model 4000-3 Input Readout Display Panel
The Input Readout Display option consists of three Readout Display circuit boards
attached to three bracket assemblies; each providing eight
4-character readouts. The bracket assemblies attach to the inside of the accessory
panel above the readout windows at the lower left of the Model 4000-3 upper
accessory panel. Refer to
. The readouts will identify the primary inputs
by the first four characters of the input name as defined in the Configuration menu
discussed later in the installation process.
To install each bracket assembly, follow the instructions below:
1.
If you are putting this option into an already installed control panel, power
down the control panel by switching the primary and redundant (if present)
power switches inside the lower tub to OFF.
2.
Open the upper accessory panel and locate the two holes in the panel metal
above each display window.
3.
There are eight holes in the Readout Display bracket metal. Line up the second
and sixth holes from the left in each bracket assembly with the two holes above
the display window so the display shows properly through the window. Refer
to
. Attach each bracket assembly to the accessory panel with two
of the six loose screws provided.
TP0621-01-06
Input Display Readouts
Figure 2-12. Input Display Readouts in Model 4000-3 Upper Accessory Panel
Summary of Contents for Grass Valley 4000
