2-69
Cable Connections
4.
Remove the Program DAC Mezzanine board from the Analog Output
Module, and turn the module to the component side. Locate jumpers J5, J6, J9,
and J11; set all four jumpers to either “a” for Color Difference format, or “b”
for RGB format.
5.
Locate jumpers J4, J8, and J10 on the Program DAC Mezzanine. Referring to
, set each jumper to the desired format selection for your analog
output format. Note that some formats require installing two jumpers on J8
and J10. Extra jumpers are stored in an inactive socket, J7. If you are changing
to a format that uses one jumper at J8 and J10, store the extra jumpers at J7. If
you lose a jumper, a suitable substitute can be made of a short piece of 24
gauge solid tinned copper wire.
6.
Carefully replace the Program DAC Mezzanine on the Analog Output
Module, making sure all connector pins are in the sockets correctly.
7.
Remove the Preview DAC Mezzanine board from the Analog Output Module,
and repeat Steps 4 and 5.
8.
Carefully replace the Preview DAC Mezzanine on the Analog Output Module,
making sure all connector pins are in the sockets correctly.
Table 2-9. Analog Output Module Setting
Format
Selection
J16
Analog Module
J5, J6, J9, J11
DAC Mezz.
Color Diff.
J4 (Y)
DAC Mezz.
J8 (R-Y)
DAC Mezz.
J10 (B-Y)
DAC Mezz.
EBU/SMPTE
No Setup
a
a
b
c
RGB .714 v
No Setup
b
b
b & d
b & d
RGB .714 v
Setup
b
c
d
a & d
RGB .700 v
No Setup
b
a
a & d
b & d
MII 50 Hz
No Setup
a
a
c
c
MII 60 Hz
No Setup
a
a
c
e
MII 60 Hz
Setup
a
c
c
e
Beta 50 Hz
No Setup
a
a
d
d
Beta 60 Hz
No Setup
a
b
d
d
Beta 60 Hz
Setup
a
c
d
d
Summary of Contents for Grass Valley 4000
