G10 Installation Guide 7.13.2
168
D
Rev. 005-140228
Bare conductors must be coated with antioxidant before crimp connections are made to
prevent corrosion.
E
QUIPMENT
C
OOLING
R
EQUIREMENTS
The G10 probe, disk storage arrays, and fuse panel may require special equipment room
cooling. Contact Tektronix for more information.
Plano, Texas USA - serves North America, South America, Latin America
+1 469-330-4581 (Customer Support voice)
(Customer Support USA email)
London, England UK - serves Northern Europe, Middle East, and Africa
+44-1344-767-100 (Customer Support voice)
(Customer Support UK email)
Frankfurt, Germany DE - serves Central Europe and Middle East
+49-6196-9519-250 (Customer Support voice)
(Customer Support DE email)
Padova, Italy IT - serves Southern Europe and Middle East
+39-049-762-3832 (Customer Support voice)
(Customer Support IT email)
Melbourne, Australia - serves Australia
+61 396 330 400 (Customer Support voice)
(Customer Support Australia and APAC email)
Singapore - serves Asia and the Pacific Rim
+65 6356 3900 (Customer Support voice)
(Customer Support APAC and Australia email)
Customer-Provided Parts
a
Supplemental
Grounding Cables
Each storage enclosure requires two earth ground 12 AWG cables for supplemental
grounding. Tektronix recommends that you use a commensurately rated, high-strand-
count copper wire cable. The length of the cables depends on your equipment
location from the source power.
Grounding Bar
Examples of suitable grounding bars from Telect are:
19” wide racks—Telect PN 02114-T19
23” wide racks—Telect PN 02144-T23
These grounding bars use #10 bolts (1/2” minimum length) and nuts to serve as
grounding studs. Each grounding connection requires two bolts/nuts.
a. These parts are not available from Tektronix, but are available from most commercial equipment vendors.
Table D.1 - Required Parts (Continued)
Item
Description
Tektronix Communications | For Licensed Users | Unauthorized Duplication and Distribution Prohibited
