![background image](http://html1.mh-extra.com/html/tektronix/geoprobe-g10/geoprobe-g10_installation-manual_1077380011.webp)
G10 Installation Guide 7.13.2
11
1
G10 New Installation and Upgrade Workflows
Rev. 005-140228
Upgrade Iris Server and Probe Software
Before upgrading a probe’s hardware, you must upgrade the Iris Server and Probe software to
the minimum software version that your upgrade scenario requires (see
The Iris
server and G10 probe MUST be on the same version of software.
Upgrade Iris Server first. Contact Tektronix Communications Customer Support for
assistance.
Upgrade probe software using the Software Management GUI in Iris Admin. Refer to
the
Iris Operations, Administration, and Maintenance Guide
or Admin online help
for detailed procedures.
Upgrade Applications Blade (IAP)
The Iris server and probe software must be upgraded to the minimum software
version that your upgrade scenario requires BEFORE performing this procedure (see
). The Iris server and G10 probe MUST be on the same version of software.
Perform the following steps to upgrade a probe from the IAP100/PRM100 RTM to the IAP320/
PRM300 RTM or IAP200/PRM200 RTM. The upgrade increases application process
capability.
The IIC100/IAP320 is not a recommended configuration and is not officially supported
for qualified performance ratings
.
Tektronix Communications recommends
upgrading systems to IIC200 when upgrading to the IAP320.
Step
Action
1.
Shut down the probe (halt the system).
Table 1.3 - Minimum Software Version Required
Probe Configuration
Minimum Version (both Probe and Server MUST
match)
IAP100
IAP200
7.11.3
IAP100
IAP200
7.12.2
IAP320
7.13.1 SP6
The
IIC100/IAP320
is
not
a
recommended
configuration
and
is
not
officially
supported
for
qualified
performance
ratings.
Tektronix
Communications
recommends
upgrading
systems
to
IIC200
when
upgrading
to
the
IAP320.
Tektronix Communications | For Licensed Users | Unauthorized Duplication and Distribution Prohibited