![background image](http://html1.mh-extra.com/html/tektronix/geoprobe-g10/geoprobe-g10_installation-manual_1077380132.webp)
G10 Installation Guide 7.13.2
132
C
Rev. 005-140228
Installing the IIC100 or IIC200
If you are upgrading a probe by replacing the IIC100 with the IIC200, refer to the G10
Installation Guide for a detailed procedure.
Perform the following to install the IIC until it is completely seated.
Step
Action
1.
Position the left and right ejector handles as shown in
Figure C.26
.
Figure C.26 - G10 IIC Ejector Handle (Left)
Ejector
Handle
Tektronix Communications | For Licensed Users | Unauthorized Duplication and Distribution Prohibited