![background image](http://html1.mh-extra.com/html/tektronix/geoprobe-g10/geoprobe-g10_installation-manual_1077380158.webp)
G10 Installation Guide 7.13.2
158
C
Rev. 005-140228
Replacing a Drive Module
A drive module consists of a disk drive in a sled. Drive modules are hot swappable, which
means that they can be replaced without halting I/O to the vdisks or powering off the
enclosure. The new drive module must be of the same type and possess a capacity equal to
or greater than the one being replaced.
Removing Air Management Modules
Step
Action
1.
Squeeze the latch release flanges inward to disengage the drive module
(
Figure C.50
).
Figure C.50 - Disengaging an Air Management Sled (AMS)
2.
Wait 20 seconds for the internal disks to stop spinning.
Tektronix Communications | For Licensed Users | Unauthorized Duplication and Distribution Prohibited