![background image](http://html1.mh-extra.com/html/tektronix/geoprobe-g10/geoprobe-g10_installation-manual_1077380135.webp)
G10 Installation Guide 7.13.2
135
C
Rev. 005-140228
6.
Push the ejector handles inward until they are flush with the front of the chassis
and the blade is inserted fully (
Figure C.31
).
Figure C.31 - G10 IIC Ejector Handle - Seating the Board
7.
Verify the following LEDs on the front of the IIC (
Figure C.32
):
The CPU LED is AMBER on the FPC100 AMC and GREEN on the
FPC200 AMC, indicating that the processor is functioning normally.
The + LED on IIC100 or IIC200 is GREEN, indicating that there are no
errors in overall health.
Figure C.32 - G10 IIC100 and IIC200 LED Verification
FPC100 AMC CPU LED (Amber)
LED (Green)
IIC200
IIC100
LED (Green)
FPC200 AMC CPU LED (Green)
Tektronix Communications | For Licensed Users | Unauthorized Duplication and Distribution Prohibited