![background image](http://html1.mh-extra.com/html/tektronix/geoprobe-g10/geoprobe-g10_installation-manual_1077380138.webp)
G10 Installation Guide 7.13.2
138
C
Rev. 005-140228
4.
Wait until the Hot Swap LED is solid blue. This indicates that the RTM has
powered down completely.
Figure C.34 - RTM Hot Swap LEDs
5.
You can perform one of the following:
Remove the RTM.
Push the latch and lever back in until the Hot Swap LED turns off.
SRM100 RTM
TRM100 RTM
Hot Swap LED
PRM100
PRM200 RTM/PRM300 RTM
Hot Swap LED
SRM200 RTM
Hot Swap LED
Hot Swap LED
Hot Swap LED
Tektronix Communications | For Licensed Users | Unauthorized Duplication and Distribution Prohibited