G10 Installation Guide 7.13.2
24
2
Install Hardware and Power Cabling
Rev. 005-140228
Two-Post Rack, Mid Mount
The G10 chassis must be securely mid-mounted to the two-post rack (also known as center
mount). The provided brackets support mounting in a standard 19-inch wide rack. If mounting
the chassis to a 23-inch wide rack, you must first install extension brackets before securing it
to the rack.
The system is heavy and improper handling may lead to muscle strain or back injury.
Have two people lift the system or use lifting aids and proper lifting techniques when
handling the system. Do not use the PEM or Fan Tray handles to lift the shelf.
Step
Action
1.
Determine the location in the rack in which you will install the G10 chassis (see
For IAP100/PRM100 RTM configurations, make sure to leave 1U of space below the
G10 to allow for SAS cabling from the SAS AMC on the font of the G10 to the back of
the controller enclosure(s).
2.
Install the front brackets to the sides of the G10 chassis using two Phillips flat
head screws (
).
Figure 2.6 - G10 Chassis - Side View with Front Bracket
Bracket
Screws
Chassis Front
Front Bracket
Tektronix Communications | For Licensed Users | Unauthorized Duplication and Distribution Prohibited
