![background image](http://html1.mh-extra.com/html/tektronix/geoprobe-g10/geoprobe-g10_installation-manual_1077380068.webp)
G10 Installation Guide 7.13.2
68
4
Power On G10 and Configure Network Connectivity
Rev. 005-140228
C
ONFIGURE
G10 P
ROBE
N
ETWORK
C
ONNECTIVITY
To configure the G10 probe for your network, you will need the information described in
Network Connectivity Parameters
.
Step
Action
1.
Connect an Ethernet cable to a laptop or PC and to the following ports on the
G10 (
Figure 4.9
).
IAP100: ETH B
port
IAP200 or IAP320: ETH
port
Figure 4.9 - G10 IAP100 and IAP200
2.
On the laptop or PC, set the Local Area Connection to
Obtain IP Address
Automatically (DHCP)
.
ETH port
IAP100
IAP200
ETH B port
IAP320
ETH port
Tektronix Communications | For Licensed Users | Unauthorized Duplication and Distribution Prohibited