![background image](http://html1.mh-extra.com/html/tektronix/geoprobe-g10/geoprobe-g10_installation-manual_1077380114.webp)
G10 Installation Guide 7.13.2
114
C
Rev. 005-140228
11.
Check the PEM Status LED (
Figure C.4
) and take the appropriate actions as
listed in
Table C.2
.
Figure C.4 - AC PEM Status LED
Table C.2 - G10 AC PEM LEDs
PEM LEDs
Status
LED OFF
The power is disconnected.
Action:
Check the AC power cable connections.
LED RED
The power supply is in a failed state.
Action:
Disconnect the AC power cord from the PEM.
Remove and insert the PEM again to be sure that it is properly seated
and secure. If the LED lights again, contact Tektronix Communications
Customer Support.
LED GREEN
The power is connected correctly.
Status LED
Tektronix Communications | For Licensed Users | Unauthorized Duplication and Distribution Prohibited