![background image](http://html1.mh-extra.com/html/tektronix/geoprobe-g10/geoprobe-g10_installation-manual_1077380022.webp)
G10 Installation Guide 7.13.2
22
2
Install Hardware and Power Cabling
Rev. 005-140228
3.
Attach the rear brackets to the rear rack posts using two rackmount screws
(
Figure 2.4
).
Figure 2.4 - Rear Bracket on Rack (Left)
for the following steps (the 30-inch rack install is used as an example):
4.
Two People: Position the G10 chassis in the rack and carefully slide the side
brackets into the rear brackets. Slide the chassis until the front brackets are
flush with the front rack posts.
5.
Secure the front of the G10 chassis to the front rack posts using four rackmount
screws.
6.
Secure the side brackets to the rear brackets with Phillips pan-head screws and
washers at the lines corresponding to your rack (30”, 36”, 42” or 1000 mm). Two
or four screws are used depending on the rack.
7.
Continue with
.
Rackmount
Screws
Tektronix Communications | For Licensed Users | Unauthorized Duplication and Distribution Prohibited