Timeout Search menu fields and controls.
Field or control
Description
Display
Sets the display of the mark icons on or off. If you have multiple searches defined, the control
turns off just the marks for the selected search.
Stop Acquisition if Event
Found
Stops input acquisition when the search event occurs. Default is not enabled.
Search Type
Set to Timeout.
Source
Lists the source channel or waveform to use to trigger or search. Types that require multiple
inputs will replace this control with a different source definition control.
Mark When
■
Stays High: The signal stays above the specified threshold level longer than the specified
time.
■
Stays Low: The signal stays below the specified threshold level longer than the specified
time.
■
Either: The signal stays above or below the specified threshold level longer than the
specified time.
Threshold
Sets the amplitude level that the signal must pass through to be considered a valid transition.
Set to 50%
Sets the threshold at 50% of the measured signal transition range. 50% is calculated as (Top +
Bottom)/2.
Time Limit
Sets the time period condition to be met.
Copy Trigger Settings to
Search
Sets the search criteria to match the current oscilloscope trigger settings.
Copy Search Settings to
Trigger
Sets the current oscilloscope trigger settings to match the search criteria.
Other search types.
Bus Search configuration menus
Edge Search configuration menu
on page 250
Logic search configuration menu
Pulse Width Search configuration menu
Rise/Fall Time Search configuration menu
Runt Search configuration menu
on page 257
Setup and Hold Search configuration menu
on page 258
Window Search configuration menu
on page 262
Menus and dialog boxes
MSO54, MSO56, MSO58, MSO58LP, MSO64 Help
261
Summary of Contents for 6 series
