CAN serial bus menu fields and controls.
Field or control
Description
Display
Turns on or off displaying the bus on the Waveform view.
Label
Enter a label for the bus. The default label is the selected bus type.
To enter label text, double-tap the field and enter label using the virtual keyboard, or tap the
field and enter text from an attached keyboard.
Position
Sets the vertical position of the bus waveform. The default position is vertically centered in a
slice (in Stacked mode), or center screen in Overlay mode. The unit of position is screen
divisions.
Set to 0
Sets the vertical position to 0 divisions (centered vertically in a slice or on the screen).
Bus Type
Set to CAN to set up and display a CAN bus waveform.
Signal Type
Sets the CAN signal type to decode. Default is CAN_H.
CAN Standard
Sets the CAN signal standard to decode. Default is CAN 2.0.
Source
Select the signal source from listed analog and digital channels.
Threshold
Sets the high/low logic transition level.
Sample Point
Sets the sample point from 5% to 95% of the position within the bit period or the unit interval.
Bit Rate
Select the bit rate of your CAN bus serial data.
To enter a custom bit rate, select Custom and enter the custom bit rate in the Custom Rate
input box.
Only available when CAN Standard = CAN 2.0.
SD Bit Rate
Select the SD bit rate of your CAN FD serial bus data.
To enter a custom bit rate, select Custom and enter the custom bit rate in the Custom Rate
input box.
Only available when CAN Standard = CAN FD (ISO) or CAN FD (non-ISO).
FD Bit Rate
Select the FD bit rate of your CAN FD serial bus data.
To enter a custom bit rate, select Custom and enter the custom bit rate in the Custom Rate
input box.
Only available when CAN Standard = CAN FD (ISO) or CAN FD (non-ISO).
Custom rate
Sets the custom bit rate to use to decode the signal. Tap the field and use the Multipurpose
knob to change the value, or double-tap on the field and use the virtual keypad to enter a
custom bit rate.
Only available when Bit Rate or SDI Bit Rate = Custom.
Display Format
Bus sets the waveform view to show just the decoded bus information.
Bus and Waveform sets the waveform view to show both the decoded bus and the source
signal waveforms.
You can also tap on the + symbol on the bus waveform to toggle between showing the bus only
or showing bus and source waveforms.
Menus and dialog boxes
MSO54, MSO56, MSO58, MSO58LP, MSO64 Help
197
Summary of Contents for 6 series
