ARINC 429 serial bus trigger settings panel
NOTE. Requires option SRAERO.
Field or control
Description
Source
Select the ARINC429 bus on which you want to trigger.
Trigger On
Select the type of information on which to trigger.
Trigger When Label
Trigger when the label data meets the specified condition
Available when Trigger On = Label.
Label
Sets the label pattern on which to trigger.
Tap the Binary, Hex, or Octal field and use the A and B knobs to select and change the
values. Or double-tap on the field and use the virtual keypad to enter values.
Available when Trigger On = Label or Label & Data.
Label Low
Sets the low value of the label pattern range on which to trigger.
Tap the Binary, Hex, or Octal field and use the A and B knobs to select and change the
values. Or double-tap on the field and use the virtual keypad to enter values.
Available when Trigger On = Label and Trigger When Label = Inside Range or Outside
Range.
Label High
Sets the high value of the label pattern range on which to trigger.
Tap the Binary, Hex, or Octal field and use the A and B knobs to select and change the values.
Or double-tap on the field and use the virtual keypad to enter values.
Available when Trigger On = Label and Trigger When Label = Inside Range or Outside
Range.
Data
Sets to trigger when the specified data bits condition occurs.
Tap the Binary or Hex field and use the A and B knobs to select and change the values. Or
double-tap on the field and use the virtual keypad to enter values.
Available when Trigger On = Data or Label & Data.
Data Low
Sets the low value of the data pattern range on which to trigger.
Tap the Binary, Hex, or Octal field and use the A and B knobs to select and change the
values. Or double-tap on the field and use the virtual keypad to enter values.
Available when Trigger On = Data and Trigger When Data = Inside Range or Outside
Range.
Data High
Sets the high value of the data pattern range on which to trigger.
Tap the Binary, Hex, or Octal field and use the A and B knobs to select and change the values.
Or double-tap on the field and use the virtual keypad to enter values.
Available when Trigger On = Data and Trigger When Data = Inside Range or Outside
Range.
Menus and dialog boxes
MSO54, MSO56, MSO58, MSO58LP, MSO64 Help
343
Summary of Contents for 6 series
