The Amplitude Measurements panel measurements.
Measurement
Description
AC RMS
The true Root Mean Square voltage, minus any DC component, of the waveform data points
that are above the Mean signal level. You can take this measurement on each cycle in the
waveform record or on the entire waveform record.
Amplitude
The difference between the Top value and the Base value. You can take this measurement on
each cycle in the waveform record or on the entire waveform record.
Area
The area between the waveform and the Mean value, calculated by integrating the data points.
The area above ground (0 V) is positive, while the area below ground is negative. You can take
this measurement on each cycle in the waveform record or on the entire waveform record.
Base
1
The most common data point value below the midpoint of the waveform, over the measurement
region. Base is used as the 0% value whenever low reference values are calculated, such as in
rise time or fall time measurements. You can take this measurement on each cycle in the
waveform record or on the entire waveform record.
Maximum
The maximum data point value. You can take this measurement on each cycle in the waveform
record or across the entire waveform record.
Mean
The arithmetic mean of all data points over the measurement region. You can take this
measurement on each cycle in the waveform record or on the entire waveform record.
Minimum
The minimum data point value. You can take this measurement on each cycle in the waveform
record or on the entire waveform record.
Negative Overshoot
1
The difference between the Minimum and Base values, divided by the Amplitude, and multiplied
by 100 to express the measurement as a percentage of amplitude. You can take this
measurement on each cycle in the waveform record or on the entire waveform record.
Peak-To-Peak
The absolute difference between the Maximum and Minimum amplitudes in the measurement
region. You can take this measurement on each cycle in the waveform record or on the entire
waveform record.
Positive Overshoot
1
The difference between the Maximum value and the Top value, divided by the Amplitude, and
multiplied by 100 to express the measurement as a percentage of amplitude. You can take this
measurement on each cycle in the waveform record or on the entire waveform record.
RMS
The true Root Mean Square (The square root of the mean (average) value of the squared
function of the waveform data points.) You can take this measurement on each cycle in the
waveform record or on the entire waveform record.
Top
1
The most common data point value above the midpoint of the waveform over the measurement
region. Base is used as the 100% reference value whenever high reference values are
calculated, such as in rise time or fall time measurements. You can take this measurement on
each cycle in the waveform record or on the entire waveform record.
See also.
Measurement configuration menu overview
on page 164
1
Changing your Base Top Method in the Reference Levels panel of the Measurement configuration menu may change how this value is calculated.
Menus and dialog boxes
MSO54, MSO56, MSO58, MSO58LP, MSO64 Help
153
Summary of Contents for 6 series
