i
Welcome Team Losi XXX-T MF2 Owner!
1.
1.
1.
1.
1. INTR
INTR
INTR
INTR
INTRODUCTION
ODUCTION
ODUCTION
ODUCTION
ODUCTION
TRIPLE-X-T FRANCIS, EDITION 2, COMPLETED KIT DIMENSIONS
Length: 16.195"
Front Width: 12.725"
Rear Width: 12.875"
Height: 5.505"
Wheelbase: 11.050" All dimensions at ride height. Weight will vary depending on accessories.
NOTES & SYMBOLS USED
Step A-1
This is a common step sequence found at the beginning of
each new illustration throughout the manual.
1. Each step throughout the entire manual has a check box to
the left of it. As you complete each step, mark the box with a check. If
you need to take a break and return to building at a later time, you will
be able to locate the exact step where you left off.
*NOTE: This is a common note. It is used to call attention to
specific details of a certain step in the assembly.
IMPORTANT NOTE: Even if you are familiar with Team
Losi kits, be sure and pay attention to these notes. They point out very
important details during the assembly process. Do not ignore these
notes!
The Team Losi icon designates a performance tip. These tips
are not necessary, but can improve the performance of your
XXX-T MF2 truck.
In illustrations where it is important to note which direction
parts are facing, a helmet like this one will be included in the illustra-
tion. The helmet will always face with a driver's perspective. Any ref-
erence to the right or left side will relate to the direction of the helmet.
KIT/MANUAL ORGANIZATION
The kit is composed of different bags marked A through G. Each bag
contains all of the parts necessary to complete a particular section of
the kit. Some of these bags have subassembly bags within them. It is
essential that you open only one bag at a time and follow the correct
assembly sequence, otherwise you may face difficulties in finding the
correct part. It is helpful to read through the instructions for an entire
bag prior to beginning assembly. Key numbers (in parentheses) have
been assigned to each part and remain the same throughout the manual.
In some illustrations, parts which have already been installed are not
shown so that the current steps can be illustrated more clearly.
For your convenience, an actual-size hardware identification
guide is included with each step. To check a part, hold it against the
silhouette until the correct part is identified. In some cases extra hard-
ware has been supplied for parts that may be easy to lose.
The molded parts in the kit are manufactured to demanding tol-
erances. When screws are tightened to the point of being snug, the
parts are held firmly in place. For this reason, it is very important that
screws not be overtightened in any of the plastic parts.
To ensure that parts are not lost during construction, it is recom-
mended that you work over a towel or mat to prevent parts from roll-
ing away.
IMPORTANT SAFETY NOTES
1. Select an area for assembly that is away from the reach of
small children. Some parts in this kit are small and can be swallowed
by children, causing choking and possible internal injury.
2. The shock fluid and greases supplied should be kept out of
children's reach. They are not intended for human consumption!
3. Exercise care when using any hand tools, sharp instruments,
or power tools during construction.
4. Carefully read all manufacturers' warnings and cautions for
any chemicals, glues, or paints that may be used for assembly and
operating purposes.
Thank you for choosing the Team Losi XXX-T Matt Francis, Edition 2. Over the past year and a half I, along with Team Losi
engineers and team members, have done extensive testing and development to give you the truck you just purchased. In addition to the
many specialty parts used on my previous race winning truck this MF2 includes a host of new and revised parts that have helped me and
my team mates get to the winners circle time and time again. I think you will find it is tougher, faster, and easier to drive than anything out
there. As you build your new XXX-T MF2 kit, be sure to read and follow the instructions carefully and don’t forget to check out the set-
up and tuning tips in the back of this manual. I hope you will enjoy your new Team Losi XXX-T M F2 as much as I do and wish you
much success. See you at the track!
Good Luck!
