B
B
B
B
BA
A
A
A
AG D (Contin
G D (Contin
G D (Contin
G D (Contin
G D (Continued)
ued)
ued)
ued)
ued)
16
Step D-10
1. Insert a 3/16" x 3/8" sealed Bearing (27) into the top Bearing
seat of the left Gearbox Half (94).
2. Insert a 1/2" x 3/4" Bearing (95) into the lower Bearing seat of
the left Gearbox Half.
*NOTE: If the 1/2" x 3/4" Bearing only has one Teflon™ seal
(colored, woven looking) in it, position the seal to the outside of the
Gearbox Half.
IMPORTANT NOTE:
Never allow the Gearbox Halves to
come into direct contact with any type of motor spray/cleaner. The
material used on these parts was selected with performance in mind,
and some motor sprays/cleaners may damage the parts.
*Note: The Motor Plate supplied in kit may look slightly differ-
ent than pictured in Figure 36.
1. Place the Motor Plate (96) against the outside of the right
Gearbox Half (97) by aligning the hole in the Motor Plate with the
Top Shaft Bearing housing in the right Gearbox Half as shown in
Figure 36.
2. Rotate the Motor Plate so that the Screw holes in the Motor
Plate line up with the Screw holes in the Gearbox Half. Secure the
Motor Plate to the Gearbox Half by threading a 4-40 x 1/2" Cap
Head Screw (57) through the hole near the center of the Gearbox
Half from the inside into the hole in the Motor Plate and tighten.
3.Insert a 3/16" x 3/8"sealed Bearing (27) into the top
Bearing seat of the right Gearbox Half. Carefully push the Bearing
all the way into the Bearing seat using a pencil or the handle of a
hobby knife. Care should be taken not to damage the seals on the
Bearing.
*NOTE: If the 3/16" x 3/8" Sealed Bearing only has one Teflon™
seal (colored, woven looking) in it, position the seal to the outside of
the gearbox half.
4. Insert a 1/2" x 3/4" sealed Bearing (95) into the lower
bearing seat of the right Gearbox Half.
5. Press or lightly tap the Idler Gear Shaft (98), into the hole in
the center of the right Gearbox Half.
Step D-11
Figure 36
Figure 35
Bearing to Left Gearbox Half:
Motor Plate to Right Gearbox Half:
97
98
95
27
96
57
27
95
95
98
27
57
95
95
94
94
27
27
