TAKASAGO HX-S-G4 Series, Instruction Manual

Page: 98 / 216

Using via Digital Data Communication
98
SYSTem Level
SYSTem level command corresponds to the settings of main FUNCTION items.
Command Name Summary
Command
Type
SYSTem - -
:COMMunicate - -
:SERial - -
[:RECeive] - -
:BAUD Sets Bitrate Both
:PACE Sets Acknowledge Response Both
:PARity - -
[:TYPE] Sets Parity Both
:UNIT Sets Query Response Unit Load Both
:CONTrol - -
:CURRent - -
:MODE Sets mode for Current Settings Control Method Both
:ISOLate Isolated of external analog control signals Both
:VOLTage - -
:MODE Sets mode for Voltage Settings Control Method Both
:ISOLate Isolated of external analog control signals Both
:ERRor - -
[:NEXT] Reads Error Message
QUERY
Only
:KEYLock
:MODE Sets LOCK mode Both
:MONitor - -
:MODE Sets Voltmeter/Ammeter Display when Output is OFF Both
:PRESet - -
:MODE Sets method to determine PRESET contents Both
:SERies Sets Master and Slave for Series Operation Both
:TRIP Executes TRIP SET Only
:BUZzer Setting Buzzer Sound -
:BUTtom Setting Button Sound Both
:ALArm Setting Alarm Sound Both
:POWer Query about System Capacity
QUERY
Only
:STORe FUNC Set Value Saving (EEPROM Rewrite) SET Only