TAKASAGO HX-S-G4 Series, Instruction Manual

Page: 96 / 216

Using via Digital Data Communication
96
STATus:MEASure:CONDition
: Retrieves Power Supply Status
Function: Retrieves the status of the power supply
Format: STATus:MEASure:CONDition?
Type: QUERY command only
Response: 3 byte 16-base data
Power Supply Bit List
Bit Status Name Summary 1 0
23 P-ON(D)_STS
Internal power unit (D) P-ON
status
* 12 kW type only
Power unit power-on Power unit power-off
22 P-ON(C)_STS
Internal power unit (D) P-ON
status
* 12 kW type only
Power unit power-on Power unit power-off
21 P-ON(B)_STS Internal power unit (B) P-ON status Power unit power-on Power unit power-off
20 P-ON(A)_STS Internal power unit (A) P-ON status Power unit power-on Power unit power-off
19 ISO_OPTHION_MOUNT Isolated Option Mounting Status Yes None
18 Not Used Always 0 - -
17 EXT_TRIP_LT_STS External TRIP Latch Status TRIP ON Normal
16 EXT_TRIP_STS External TRIP Status TRIP ON Normal
15 OVP_STS OVP Adjustment Status *1 Above OVP level Below OVP level
14 OCP_STS OCP Adjustment Status *1 Above OCP level Below OCP level
13 Not Used Always 0 - -
12 EXT_ON
Toggling Output ON/OFF at
External Contacts
Input Status
ON OFF
11
ALM_BUS_STS
(SYS_ALM)
System error Error Normal
10 DD_ON_BUS_STS DC/DC Output Status ON OFF
9 MST/BST_STS Master/Booster Status *2 Booster *2 Master
8 P-ON(B)_STS P-ON(Booster) Status
Booster Main Power
Supply ON *2 Booster Main Power
Supply OFF *2
7 P-ON(M)_STS P-ON(Master) Status Main Power Supply ON Main Power Supply OFF
6 Not Used Always 0 - -
5 OHP_ALM
OHP(Over Heating Protection)
Error
Error Normal
4 OCP_ALM
OCP (Over Current Protection)
Alarm
Triggered Not triggered
3 OVP_ALM
OVP (Over Voltage Protection)
Alarm
Triggered Not triggered
2 Not Used Always 0 - -
1 CC_STS CC Operation Status CC operating Not CC
0 CV_STS CV Operation Status CV operating Not CV
*1 It is the status for factory adjustments of OVP and OCP. Practically, the status when OVP and OCP are running is
output to Bit4 OCP_ALM and Bit3 OVP_ALM
*2 Booster refers to the HX-S-G4 Series power supply that is running as a slave unit under parallel operation.
<Ex.>
STAT:MEAS:COND?
300180
(This shows the status where P-ON(B)_STS, P-ON(A)_STS, P-ON(B)_STS, and P-ON(M)_STS are 1.)