TAKASAGO HX-S-G4 Series, Instruction Manual

Page: 101 / 216

Using via Digital Data Communication
101
SYSTem:CONTrol:CURRent:MODE
: Sets Mode for Current Setting Control Method
Function: Sets mode for the method on setting the current
Same as FUNCTION Settings Item 71
Format: SYSTem:CONTrol:CURRent:MODE <NRf>
Type: SET command, QUERY command
Parameters: 0: Front Panel, Digital Communication
1: External Voltage
2: External Resistance Type-A
3: External Resistance Type-B
4: External Resistance Type-C
Response: Same as parameters
Restrictions: Alarm response is returned for normal SET commands in the following conditions
- While operating as a series operation slave unit
- While operating as a parallel operation slave unit
<Ex.>
SYST:CONT:CURR:MODE 1
SYST:CONT:CURR:MODE?
1
SYSTem:CONTrol:CURRent:ISOLate
:
Sets Isolation for external analog control signal constant current (CC)
Function: Sets isolation for external constant current (CC) analog signal
Same as FUNCTION Settings Item 41
Format: SYSTem:CONTrol:CURRent:ISOLate <NRf>
Type: SET command, QUERY command
Parameters: 0: Invalid
1: Valid
Response: Same as parameters
Restrictions: Alarm response is returned for normal SET commands in the following conditions
- If isolated option is not attached
- While operating as a series operation slave unit
- While operating as a parallel operation slave unit
<Ex.>
SYST:CONT:CURR:ISOL 1
SYST:CONT:CURR:ISOL?
1