TAKASAGO HX-S-G4 Series, Instruction Manual, Page: 34 / 216

Basic Usage
34
Settings Items List (Continued)
Calibration, Isolated option, Panel Operation
Item
No.
Settings Item Range and contents of Parameter Default Value
20
Ca
librati
on
Voltage Setting Offset Not displayed
21 Voltage Setting Full-Scale Not displayed
22 Current Setting Offset Not displayed
23 Current Setting Full-Scale Not displayed
24 Voltage Measurement Offset Voltage measured value
25 Voltage Measurement Full-Scale Voltage measured value
26 Current Measurement Offset Voltage measured value
27 Current Measurement Full-Scale Voltage measured value
28
External Analog
Input
Voltage Setting
Offset
Not displayed
29
Voltage Setting
Full-Scale C: Coarse adjustment, F: Fine
adjustment
C: Coarse adjustment
30
Current Setting
Offset
Not displayed
31
Current Setting
Full-Scale C: Coarse adjustment, F: Fine
adjustment
C: Coarse adjustment
32 Voltage Monitor Output Offset Not displayed
33 Voltage Monitor Output Full-Scale Not displayed
34 Current Monitor Output Offset Not displayed
35 Current Monitor Output Full-Scale Not displayed
36 - Not displayed
37 Voltage offset when series slave Not displayed
38 Voltage full-scale when series slave Not displayed
39
User adjustment value initialization
(CV, CC, Voltage/Current
measurement) 0=Invalid 0=Invalid
1=Valid
40
Isola
tt
io
n
op
tio
n
Constant Voltage (CV)
Isolation of external analog control
signals
0=Invalid
0=Invalid
* This function can be set for
isolation-function-mounted
type "model name with I"
only
1=Valid
41
Constant Current (CC)
Iisolation of external analog control
signals
0=Invalid
1=Valid
50
Pa
nel O
pe
rati
o
n
Methods for Determining PRESET
Contents
0=Determines PRESET contents after
PRESET mode is complete 0=Determines PRESET
contents after PRESET
mode is complete
1=Determines PRESET contents
during PRESET mode
51 OUTPUT Status when POWER ON
0=OFF (TOGGLE) 0=OFF (TOGGLE)
1=MODE1 (HOT START)
2=MODE2 (HOT START)
Startup with OUTPUT OFF when
recovering from ALM occurrence or
TRIP operation.
OUTPUT ON when the OUTPUT key is
pressed.