TAKASAGO HX-S-G4 Series, Instruction Manual

Page: 79 / 216

Using via Digital Data Communication
79
ALM Level
ALM level command corresponds to external output settings for alarm reset and status information.
Command Name Summary Command Type
ALM - -
:CLEar Executes alarm reset SET Only
:CONTain - -
:CC Sets whether to include CC_STS in LEVEL1_ALM or not Both
:CV Sets whether to include CV_STS in LEVEL1_ALM or not Both
ALM:CLEar
: Executes Alarm Reset
Function: Executes alarm reset (Cancels generated Over Voltage/Over Current alarm)
Format: ALM:CLEar
Type: SET command only
No parameters
<Ex.>
ALM:CLE
ALM:CONTain:CC
:Sets whether to contain CC_STS in LEVEL1_ALM
Function: Sets whether to contain CC_STS status in LEVEL1_ALM output condition.
Same as FUNCTION Settings Item 75
Format: ALM:CONTain:CC <NRf>
Type: SET command, QUERY command
Parameters: 0: Does not include in LEVEL1_ALM
1: Includes in LEVEL1_ALM
Response: 0, 1
Restrictions: Alarm response is returned for normal SET commands in the following conditions
· If analog option is not attached
· While operating as a parallel operation slave unit
<Ex.>
ALM:CONT:CC 1
ALM:CONT:CC?
1
Important note: Please perform alarm reset after removing the cause without fail.
！
CAUTION