TAKASAGO HX-S-G4 Series, Instruction Manual

Page: 108 / 216

Using via Digital Data Communication
108
SEQUENCE Level
Sequence operation setting is performed by digital data communication too.
Command Name Summary Command Type
SEQuence
－ －
：
MODE
Setting for sequential operation
Both
：
RCOUnt
Number of Repetition Setting for sequential operation
Both
：
PATTern
Contents Setting for sequential setting
Both
：
STOP
Output Setting at the end of sequential operation
Both
： STATus
Status Acquisition of sequential operation
QUERY Only
SEQuence
：
MODE
：
Setting for sequential operation
Function
：
Set operation mode of DC power supply operation and sequential operation.
Same as FUNCTION Setting Item 100.
Format
： SEQuence ： MODE[] ＜ NR1 ＞
Type
：
SET command, QUERY command
Parameter
：
0 : Disable of sequential operation (DC power supply operation)
1 : Enable of sequential operation (Normal)
2 : Enable of sequential operation (Continue)
Response
：
Same as parameters
Restrictions ： Alarm response is returned for normal SET commands in the following conditions
- Alarm is occurring
- Sequential operation is in progress
- Power supply is operating as slave machine in serial operation
- Power supply is operating as slave machine in parallel operation
＜ Ex. ＞
SEQ
：
MODE[]1
SEQ
：
MODE?
1