PRO CAN PUMP DUAL (PRO-CPD20)
Rev 1.6
2023/07/31
23/95
Copyright
©
2023 by TAEHA CORP. All Rights Reserved
3)
Blower is turned on and air is supplied to the inside of the pail. As the cylinder rises in stages, the
follower plate begins to rise.
(At this time, the disposal cover is usually separated inside the pail, but if it is not separated from
the follower plate and rises together, hop directly.)
4)
When the Follower plate reaches the top of the pail, the blower turns off and rises until the
cylinder detects a high sensor.
(At this time, do not press the change button before the cylinder detects the high sensor. When
the cylinder detects the high sensor, the LED of the change button will automatically turn off.)
5)
Check the control screen when the LED of the Change button turns off.
6)
Remove the pail.
Vent valve is turned off automatically, and Level is displed as “???”
