PRO CAN PUMP DUAL (PRO-CPD20)
Rev 1.6
2023/07/31
42/95
Copyright
©
2023 by TAEHA CORP. All Rights Reserved
Act2. When the cylinder position is equal to or less than the set-up blower high value, it becomes
blower off and makes the cylinder up.
Act3. After that, when the cylinder top limit contact point sensor is detected, the cylinder operation
stops to make the vent valve on.
6.5.2
Manual mode
During manual replacement of pail, the replacement can proceed to manual mode by referring to the
auto mode sequence on pail page.
